1,Support Applicable motors: AC induction motor, permanent magnet synchronous motor (PMSM)
2 High performance open loop and close loop vector control (support different kinds of encoders)
3.High torque control in low frequency 0.5Hz/150%(SVC), and 0Hz/180%(FVC)
real vector control with three hall sensor current detecting
4.Support 2 analog input 0-10v 4-20MA and two analog output as well as support IO expansion card
5. Protections: Over-voltage stall, under-voltage, current limit, overload, overheat, over speed, over-voltage, etc.
6.Support PID with fastest response
7 Support RJ45 Cables and standard keypad support 100m control
8 fast auto tuning less than 1 minutes
Item |
quaternu di carichi |
||
Funzioni standard |
Frequenza massima |
0 ~ 3200.00Hz |
|
Frequenza di u trasportatore |
0.5–16 kHz(The carrier frequency is automatically adjusted based on the load features.) |
||
Input frequency resolution |
Digital setting: 0.01 Hz Impostazione analogica: frequenza massima x 0.025% |
||
Modu di cuntrollu |
Sensor-less flux vector control (SFVC) Closed-loop vector control (CLVC) (+PG Card) Voltage/Frequency (V/F) control |
||
Startup torque |
G type: 0.3Hz/150% (SFVC) ; 0 Hz/180% (CLVC) P type: 0.5Hz/100% |
||
Speed range |
1: 200 (SFVC) |
1:1000 (CLVC) |
|
Speed stability accuracy |
± 0.5% (SFVC) |
± 0.02% (CLVC) |
|
Torque control accuracy |
±5% (CLVC) |
||
Capacità di sopracarica |
G type: 60s for 150% of the rated current, 3s for 180% of the rated current P type: 60s for 120% of the rated current, 3s for 150% of the rated current |
||
Aumentu di coppia |
Auto boost; Manual boost: 0.1%~30.0% |
||
Curva V/F |
Straight-line V/F curve Multi-point V/F curve N-powerV/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square) |
||
separazione V/F |
Dui tipi: siparazioni cumpleta; a mità di separazione |
||
Acceleration/deceleration curve |
Straight-line ramp S-curve ramp Four groups of acceleration/deceleration time with the range of 0.00s~65000s |
||
Funzioni standard |
frenu DC |
DC braking frequency: 0.00 Hz ~ maximum frequency Braking time: 0.0~100.0s Braking trigger current value: 0.0%~100.0% |
|
cuntrollu JOG |
JOG frequency range: 0.00Hz~50.00 Hz JOG acceleration/deceleration time: 0.00s~65000s |
||
Built-in PLC, multiple speeds |
It realizes up to 16 speeds via the simple PLC function or combination of DI terminal states. |
||
Built-in PID |
It realizes closed loop control system easily. |
||
Auto voltage regulation (AVR) |
It can keep constant output voltage automatically when the mains voltage fluctuation. |
||
Overvoltage/ Over current stall control |
The current and voltage are limited automatically during the running process so as to avoid frequently tripping due to overvoltage/over current. |
||
Rapid current limit function |
It can auto limit running current of frequency inverter to avoid frequently tripping. |
||
Limite di torque è cuntrollu |
(Excavator characteristics) It can limit the torque automatically and prevent frequently over current tripping during the running process. Torque control can be implemented in the VC mode. |
||
Individualized functions |
l'armata di |
Control of asynchronous motor is implemented through the high-performance current vector control technology. |
|
Instant power off not stop |
The load feedback energy compensates the voltage reduction so that the frequency inverter can continue to run for a short time. |
||
Rapid current limit |
To avoid frequently over current faults of the frequency inverter. |
||
Controllo di u timing |
Time range: 0.0~6500.0 minutes |
||
Multiple communication protocols |
Currently supports communication bus via Modbus-RTU and later will support PROFIBUS-DP, CANopen, etc. |
||
Prutezzione sopra à calore di u motoru |
The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection. |
||
Multiple encoder types |
It supports incremental encoder and encoders such as differential encoder, open-collector encoder, resolver, UVW encoder, and SIN/ COS encoder. |
||
Advanced background software |
It supports the operation of frequency inverter parameters and virtualoscillograph function, by which the state of frequency invertercan be monitored. |
||
Run |
Running command giving |
key panel Terminali di cuntrollu Portu di cumunicazione seriale You can switch between these giving in various ways. |
The Performance of JAC 580
Support the vector control for various motors.
The newest non-speed sensor vector control
Characteristics of high starting torque and superior responsiveness
spicifichi tecnica
Item |
spicifichi |
||
Funzioni standard |
Frequenza massima |
Vector contro: 0~300Hz; V/F control: 0~3200Hz |
|
Frequenza di u trasportatore |
0.5kHz ~ 16kHz A frequenza di u traspurtadore hè automaticamente aghjustatu in basa di e caratteristiche di carica. |
||
Input frequency Risuluzzioni |
Impostazione digitale: 0.01 Hz Impostazione analogica: frequenza massima x 0.025% |
||
Modu di cuntrollu |
• Sensorless flux vector control (SFVC) • Closed-loop vector control (CLVC) • Voltage/Frequency (V/F) control |
||
Paru di partenza |
• G type: 0.5 Hz/150% (SFVC); 0 Hz/180% (CLVC) • P type: 0.5 Hz/100% |
||
Funzioni basichi |
Speed range |
1:100 (SFVC) |
1:1000 (CLVC) |
Precisione à velocità constante |
± 0.5% (SFVC) |
± 0.02% (CLVC) |
|
U cuntrollu di torque precisione. |
± 5% (CLVC) |
||
Capacità di sopracarica |
• G type: 60s for 150% of the rated current, 3s for 180% of the rated current • P type: 60s for 120% of the rated current, 3s for 150% of the rated current |
||
Aumentu di coppia |
•Fixed boost • Customized boost 0.1%–30.0% |
||
Curva V/F |
• Straight-line V/F curve • Multi-point V/F curve •N-power V/F curve (1.2-power, 1.4-power, 1.6-power, ,1.8-power, square) |
||
separazione V/F |
Dui tipi: siparazioni cumpleta; a mità di separazione |
||
Curva di accelerazione / decelerazione |
•Straight-line ramp • S-curve ramp Four groups of acceleration/deceleration time with the range of 0.0–6500.0s |
||
DC braking. |
DC braking frequency: 0.00Hz~maximum frequency Braking time: 0.0s~36.0s Braking action current value: 0.0%–100.0% |
||
cuntrollu JOG |
JOG frequency range: 0.00–50.00 Hz JOG acceleration/deceleration time: 0.0–6500.0s |
||
Simple PLC and multi-speed operation |
It implements up to 16 speeds via the simple PLC function or combination of DI terminal states. |
||
Onboard PID |
It realizes process-controlled closed loop control system easily. |
||
Automatic voltage regulation (AVR) |
It can keep constant output voltage automatically when the mains voltage changes. |
||
Overvoltage/ Overcurrent stall contru à |
The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/overcurrent. |
||
Quick current limiting |
Maximize overcurrent failure and protect the frequency converter in normal operation |
||
Torque limit and cuntrollu |
It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be implemented in the CLVC mode. |
||
Individualized functions |
l'armata di |
Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology. |
|
Power dip ride attraversu |
The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. |
||
Rapid current limit |
It helps to avoid frequent overcurrent faults of the AC drive. |
||
Controllo di u timing |
Time range: 0.0–6500.0 minutes |
||
Multi-motor cunversione |
Four motors can be switched over via four groups of motor parameters. |
||
Bus support |
Support field bus: Modbus |
||
Motor overheat prutezzione |
The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection. |
||
Multiple encoder tippi |
Support difference, open collector and rotary transformer |
||
Internet |
Fonte di cumandamentu |
U pannellu di operazione, u terminal di cuntrollu è u portu di cumunicazione seriale sò datu Cambia in diversi metudi |
|
Fonte di frequenza |
Diverse fonti di frequenza: riferimentu digitale, riferimentu di tensione analogica, riferimentu di corrente analogica, riferimentu di impulsu è riferimentu di portu seriale. U cambiamentu pò esse realizatu in diversi metudi |
||
Fonte di frequenza ausiliaria |
10 tipi di fonte di frequenza ausiliaria. U jog di frequenza ausiliaria è a sintesi di frequenza pò esse realizatu in modu flessibile |
||
Terminal di ingressu |
Normi: 7 terminali di input digitale, trà i quali unu supporta l'input di impulsi à alta velocità massima di 100 kHz 2 analog input terminals, among which one only supports voltage input of 0 ~10V and the other supports voltage input of 0 ~10V or current input of 4 ~20mA Capacità di espansione: 3 terminali di input digitale 1 analog input terminal, which supports voltage input of -10V ~10V and supports PT100/PT1000 |
||
Internet |
Terminal di surtita |
Normi: 1 terminale d'uscita di impulsi à alta velocità (U tipu di cullettore apertu hè opzionale), chì supporta l'output di signale quadratu 0 ~ 100 kHz 1 terminale di output digitale 1 terminale di output relay 1 analog output terminal, supporting current outpout of 0~20mA or voltage output of 0~10V Capacità di espansione: 1 terminale di output digitale 1 terminale di output relay 1 terminale di uscita analogica, chì sustene l'output currente di 0 ~ 20mA o l'output di tensione di 0 ~ 10V |
|
Funzionamentu di display è tastieru |
Elencu LED |
Mostra u paràmetru |
|
Serratura chjave è selezzione di funzioni |
Realizà a serratura parziale o tutte e chjave è definisce a gamma d'azzione di alcune chjave per prevene u misoperation |
||
Funzione prutezzione |
Prutezzione di cortu circuitu di u mutore elettrificatu, prutezzione di fasi predeterminata di input / output, prutezzione di sovracorrente, prutezzione di sovratensione, prutezzione di sottutensione, prutezzione di surriscaldamentu, prutezzione di sovraccarichi, etc. |
||
options |
IO expansion card, differential input PG card, OC input PG card and rotary transformer PG card. |
||
Environment |
Service site |
Indoor, free from direct sunshine, no dust, corrosive gas, combustible gas, oil fog, water vapor, drip or salt, etc. |
|
Altitudine |
Menù di 1,000m |
||
Tempu Ambientu |
-10℃~ +40℃ (Please use the equipment by derating at ambient temperature of 40℃~50 ℃) |
||
umidità |
Less than 95%RH, no water condensation |
||
Chjami Aghjalesi |
Less than 5.9m/s2(0.6g) |
||
Temperature Storage |
-20℃~ +60℃ |
||
Gradu IP |
IP20 |
||
U nivellu di contaminazione |
PD2 |
||
Sistema di distribuzione di energia |
TN , TT |
U megliu serviziu da u nostru espertu drive in a trasmissione direttamente à a vostra inbox.
Yantai Bonway Manufacturer Co.ltd
ANo.160 Changjiang Road, Yantai, Shandong, China (264006)
T + 86 535 6330966
W + 86 185 63806647